Hello, I am looking for some advice from anybody who has disassembled a Pike grinder. I have removed the screws keeping the crank case together, and removed the wheel. It seems like the main spindle needs to be removed in order for the case to come apart, but from various postings I have seen on the web, nobody mentions this. Appears there is a pin attaching a saucer shaped bearing to the spindle. The only thing I can think is that I have to drive this pin out and remove the 'saucer' and then the whole spindle may come out and let the case open. If anybody has disassembled one of these, can you please confirm that this is the plan? Thanks! Josh