Dowels to attach support cross piece to trestle legs

[Claude Carriere]

I am considering using large 1 inch dowels glued in to attach the support beam to the legs on a large Trestle table that I am building. Will this be problematic in the sense it may interfere with wood movement and also strength? See the attached pics of drawing and mockup.
Thank you.
image.jpgimage.jpg

[Jerry Miner]

Are the dowels intended to be the only connection between leg and stretcher? Seems weak to me--very little racking resistance.

If you do this, I would suggest including a dado in either the stretcher or leg (or both) to create a shoulder to resist racking.

The traditional tusk-tenon joint (with shoulders) is a much stronger joint, IMHO

[Claude Carriere]

Great point. Thanks for this!