Guys...
Here is a quick video of the first programmed cuts
on my latest home project. It's a CNC add-on for a wood turning lathe. I think
the video will give a fairly good idea of its capabilities.

I
have some work to do with chip guards and macros etc., but I just had to cut
something to see if it worked!

File shown was designed and
toolpathed using VCPro 8. RPM as on screen, feed 30ipm, .125 (radius .25
diameter) cut per pass with the 10mm tool and .030 with the detail tool. Enjoy!


http://youtu.be/126hNJ9CEi0