Cherry veneer 5-6mm supplier: UK?

[Mark Ward]

I have 3mm cherry veneer supplies no problem, any other suggested places to get 5 or 6mm thick cherry veneer from other than Moran's Wood Components in the UK?

[Steve Morris]

you could try 908 Ltd, they have Laserable Cherry 6mm might be right for you Mark

http://www.908ltd.co.uk/webshop?page...category_id=33

Cheers
Steve

[Frank Corker]

Their prices are laughable!

[Mark Ward]

you could try 908 Ltd, they have Laserable Cherry 6mm might be right for you Mark

http://www.908ltd.co.uk/webshop?page...category_id=33

Cheers
Steve

Thanks for the reply Steve but that is a solid cherry wood, I was after a 5-6mm cherry veneer as I've got a good source for the solid cherry.

Their prices are laughable!

They do seem pretty high. Do you have any suggestions Frank?

[Jiten Patel]

Try James Latham. They have literally hundreds of finishes and their prices are very good. They only supply large 8x4 sheets, but you can get them cut down yourself quite easily or DIY them with a cheap jig-saw or band-saw.Hope that helps mate.

I agree with Frank. 908 are a joke with pricing. Trying to be a rubbish laser-bits or similar with about a 4 million percent markup!!!

[Bill George]

We are going to miss Jeremy on Top Gear, one of my very favorite shows.... from the UK.

[Jiten Patel]

100% agree Bill. It was my favourite show being a major petrol head....and at first, I was quite annoyed they fired him....but taking a step back...it was essentially one employee attacking another which is just not on.