Quote Originally Posted by Dave Sheldrake View Post
nop...it's an 80 watt Dan, the operating current for your tube is 28mA (30mA max) that PSU only pumps a max of 26mA when run at 100% so you will never achieve full power in the tube you have paid for.
so I found a flaw with the power wire and the arcing issue is no longer apparent. I will attempt to align and test tomorrow. the power supply said it was 80-100w so im hoping it does indeed work well if not I guess I will exchange it if they will take it back.

when on the phone with laser depot usa they stated the bought hurricane laser out and it is indeed the same billing address as the previous company so..... its food for thought

thank you guys for the prompt and helpful advice.... wish me luck