I bought A 1.5hp motor from grizzly about a week ago to put on my planer.
The item is part H4324.
The listing says it's a NEMA56 frame so I assumed it was the same as my planer had. .
Motor arrives and its got a 1" shaft diameter and .440" keyway. 56 standard is 5/8" shaft.
When I called today because it's obviously not standard 56 I was told they has no specs. And couldn't tell me what it came from.
Does anyone know where I might find specs or a 3" OD pulley with a 1" bore and .440 keyway?