Just picked up one of these by way of So Yamashita.
I discovered this by way of Derek's website, so thank you sir!
Just picked up one of these by way of So Yamashita.
I discovered this by way of Derek's website, so thank you sir!
Bumbling forward into the unknown.
Nice! Taking advantage of the yen at .0084 to the USD are we?
Thanks! Indeed, it's been very favorable lately so I have a few things on the way.
Bumbling forward into the unknown.
Sweet !
Peace oaf.The message you have entered is too short. Please lengthen your message to at least 10 characters.
Last edited by Winton Applegate; 03-30-2015 at 10:25 PM.
Sharpening is Facetating.Good enough is good enoughButBetter is Better.
Brian,
Beautiful. I expect it will function as well as it looks....congrats.
ken
Nice rhythm in the hammering. It takes real skill to get those hammer marks so much the same size all over. Some silversmiths should be so skillful.
Last edited by george wilson; 03-31-2015 at 9:10 AM.
Thanks gents, enjoying this tool addiction!
Bumbling forward into the unknown.
Hi Brian
I think that you will like that gennou ... very much!
Did you make the handle or did it come with the head?
In my case I purchased only the Tenryuu gennou head from So ...
The handle I made from Jarrah, with So's blessing, since he believes it has perfect characteristics. The shape and the head attachment are traditional. The handle is curved to identify the domed from flat gennou faces, while the head end of the handle is compressed until it can squeeze through the tapered fitting. It then uncompresses and becomes tight. There is a description on my website: http://www.inthewoodshop.com/ShopMad...oraGennou.html
Enjoy!
Regards from Perth
Derek
Its enjoyable to use as well. Interesting how the hardened faces transfer energy, maybe it's just me but it seems to drive the chisel harder than the heavier (750G) gennou I have with iron faces.
So made the handle and I did the final fitting and install. I'm still working at the install, ebony does not compress easily, so I'll keep 'installing' for a few more days to try and eek a hair more out of the compression fit.
Bumbling forward into the unknown.
The "tricks" in/of Japanese tooling and woodworking never fail to amaze me. Beautiful hammers guys. I'd be hard pressed to even use them.
Are they as expensive as I would expect?
Bill
On the other hand, I still have five fingers.
I found the web site but it is a little hard to figure out in terms of what might be available for how much.
Derek site says he made his handle with a spokeshave. I am guessing there was a little more to it than that, but I have plenty of spokeshaves. Sounds like a fun project. I am planing to harvest wood from a few trees that came down in a storm not long ago, enough to make some chairs I hope. There should be plenty to make a handle or two. I need to replace the handle on my splitting axe too...
Thanks Bill,
They are about $200~
Sorry Steve, I misremembered, my first one is actually 675 G, I got it from Stu (tools from japan). It came with an oak handle which was fitted with a wedge. The wedge did not allow me to make it tight enough so I fitted it in the same manner as So Yamashito explains (also same as Derek Cohen).
The one I purchased from So is also 675 G, but he does offer one as large as 750G, but they appear to be sold out at the moment.
I truly had no purpose for buying the new hammer, just couldn't resist.
Bumbling forward into the unknown.
Cool, thanks!
"For me, chairs and chairmaking are a means to an end. My real goal is to spend my days in a quiet, dustless shop doing hand work on an object that is beautiful, useful and fun to make." --Peter Galbert
Dude.
It's a hammer.