Found this Taiwanese version of the Full Spectrum website... same layout, same products, etc. Make you wonder who's selling what to whom...
http://www .anjun.com.tw/fullspectrumlaser_e.jsp
Found this Taiwanese version of the Full Spectrum website... same layout, same products, etc. Make you wonder who's selling what to whom...
http://www .anjun.com.tw/fullspectrumlaser_e.jsp
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Were you not aware that its products are manufactured overseas? I hope you were sitting down while you were browsing this morning.
I often read that there are only a handful of Chinese factories that manufacture lasers for companies like FS. Clicking through the ANJUN site, I also see MakerBot, formlabs, ExxonMobile, Solidoodle, etc. Either way, I don't see the downside.
The layouts don't look the same to me:
FSLASER.jpg
ANJUN.jpg
Matt, I'm well aware of where their products are coming from, I just found it amusing a near-direct copy of their site is on the Taiwanese page. If you click on Products on the FSL page, it is practically a 1:1 copy (different colors and such). Even the "Premium Support Package" is the same, word for word. Who copied whom...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I would guess since the copy for the "Premium Support Package" on the Anjun site is in English and mentions visiting their Las Vegas location for training and support, that FSL originally authored that. Also, it looks like the copyrights on the FSL and Ajun websites are 2011 and 2013, respectively. Perhaps Ajun is an Asian distributor for FSL, MakerBot, formlabs, et al. If so, it's common to lift photos and copy.
hey Dan, have a look at the beam combiner picture
Put your engineers head on
Then throw up when you notice the slot milling quality
You did what !
I think Dan's considering a FSL 40 watt to back up his Trotec speedy
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander