I have two unopened cans of Waterlox Original. This summer I plan on making a blanket chest out of black walnut. I am slowly accumulating the lumber to prevent a sudden deep hole in my pocket.
Would I need to do anything besides wiping on the varnish? I plan on putting on several coats until it is pleasing to one's eye. Then after a 30 day or so cure time lightly rubbing it out.
I do not plan on using a grain filler. Is it probable I would get a different sheen in the grain?
I would like to hear from folks who have used Waterlox on walnut or from others that have other finishing ideas.
We made a Shaker 1840 clock from walnut for my daughter. She wanted it dark and I used garnet shellac and Transtint walnut dye. It was far too dark for my tastes.
Thank you