What was that setting Mike, was it the tickle? Or was it in the tuning? I can't remember.
What was that setting Mike, was it the tickle? Or was it in the tuning? I can't remember.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Steve
I'm not at my machine but I don't believe there is a tickle adjustment available with this Coherent tube. In fact, the only machine I ever changed the tickle setting on was an old dinosaur Epilog--so old that the table moved in the Y axis instead of the gantry.
The newer versions of JC added things like job time estimating, photo engraving settings, HQ engraving and many others that my simple plastic engraving doesn't require.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
That's it Mike, that's what it was. No tickle adjustment.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
I think that's just that era of machine. I remember talking to Mike when he was trying to do something, and the tickle seemed to be the solution, but he didn't have control over it. I think it was related to the board, not the tube. I'm guessing it's a legacy board, but that's just a guess. I suspect tickle adjustments came shortly after that.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
The Trotec tech told me this particular Coherent tube didn't have tickle adjustments. That may not be accurate but he implied that the other tubes had the adjustment.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
There is a record of how many hours the laser had been firing, in addition to how many hours the machine was on.
I forget exactly where you access this info in the software - settings?
If the tube has been replaced this info may not be completely accurate although it would still give an idea of how much use the machine really had.
Materials Conversion Specialist
I take perfectly good large pieces of stuff & turn them into smaller pieces having dubious value
LASER: Trotec Speedy 300 30 Watt, CNC: Shopbot PRT, Vinyl Cutter: Summa Sign Pro T750
Old School: a tool box full of brand new sign painting brushes from the 60's
I believe that can be found under the view menu in the job history folder. I believe that history is lost when you upgrade JCX unless you figure out how to copy and save the file.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Well,
after some more negotiations i did buy the damn thing
Its up and running, and now i just have a whole new world to explore.
Trotec Speedy 300 25W
Trotec=Austria, Gravograph=France....
Is there such a thing as an actual "western" western laser?
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now - fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
go far enough west and you get to china
or is that "western" as in made by cowboys
sorry, couldn't resist
Trotec Speedy 300 50W
Gantry CNC Router/Engraver
Various softwares
Always keen to try something new
Please don't steal - the government hates competition