Infinity Resaw Bandsaw Blade

[charlie kapper]

I have a Laguna LT16 bandsaw. I want to try an Infinity Re-saw bandsaw blade. My bandsaw takes a 130 inch blade. The Infinity offers a 125 and a 131 1/2" blades. Will the 131 1/2" work. I don't want to have to send a blade back because it's too big.

[Jebediah Eckert]

I think you need a 130" blade? I never heard of a range of sizes, you buy what it takes.

[Jamie Buxton]

Call Infinity to get them to make you a blade the size the saw wants. Especially in the larger saws, custom blades are common.

[Peter Kelly]

You might try the Bladerunner ones from Louis Iturra. These are the same as he Woodslicer but a little less expensive. He'll weld any length you need.

Iturra Design
(904) 642-2802

[Tim Bridge]

I have had good luck with the Laguna blades.
The Resaw King is pricy, but the Shear Force blades are close to the Infinity blade you were looking at for $45.
http://www.lagunatools.com/accessori...-3-4-TPI-X-130

You might want to give it a look if you want an off the shelf 130" blade.

[Sam Puhalovich]

I have a LT-16 ... and I'm pretty sure that the blade length is 145" ... better check before you order anything.

edit: Oops ... sorry 'bout-that ... I have a 'HD' 16 ...