I have looked through the forum for my problem, but can't seem to find it. Apologies if this has been covered. I have found topics about aligning the C02 with mirrors, but not adjustment for the alignment beam.
The red alignment beam does not line up with the laser. In the photo, there is a dark spot where the laser fired, but the red alignment beam is to the right of the actual pulse. I am able to move the alignment beam up and down. I am also able to rotate it around the axis that it is attached to (this only changes the orientation -- the alignment is still off).
I don't see a way to line these up. Has anyone else had this issue?
Thanks.
Reply With Quote
