I am using the Infinity back cutter with the 103 rub collar they offer stacked with their raised panel cutter. The back cutter is leaving a much wider cut then I expected. I thought to use a larger rub collar but it doesn't fit the recess of the tooling and rides on the cutters.
My expectation was to have the back of the panel flush with the frame. The tooling I bought is doing what it's supposed to but I don't get the idea of such a large relief. I can't run a back fence because the table of the shaper is not that large. I guess I'm asking if I'm expecting to much or a better way to get the results I was looking for. Pic attached for your viewing pleasure. BTW that is scrap flooring glued up for a practice panel not the real deal.