Been trying different designs using different segment angles/sizes in rings. First two pictures show inside and outside of same bowl, the inside was fumed with ammonia while the outside was not. Really brought out the grain in the oak while the ash and cherry were not changed. (miss place cut sheet but contains 4 different segment angles in each ring)


The vase is made with ash, oak and a cherry top. All oak pieces were cut at 24 degrees wedge, the ash was cut with 12 degree wedge. Segments in rings start with 13 pieces on solid base and each additional ring adds two additional pieces, 15,17, 19, … 31. I identify my wedge based on number of segments in 360, hence 15 segments yields a 24 degree angle.IMG_0728.jpgIMG_0726.jpgIMG_0727.jpg