Stewie, I have mentioned this on the Oz forum where you posted, that you appear to have an Owner's Mark rather than a Maker's Mark.
The original thread originated on SMC, which is here: http://www.sawmillcreek.org/showthre...r-marking-wood
Regards from Perth
Derek
That's very nice, and 7 tons is a lot of force. Wow.
Derek, you are wrong. THIS is a Maker's Mark:
image.jpg
Hello Derek. Read this and you might learn something.
HAND STAMPS
Stamps can be divided into two main types
INTAGLIO Where the letters are cut into the face sunk (as in stamping coins)
INCUSE Where the face is cut in relief.
Different types of makers marks. https://www.google.com.au/search?q=m...FRYakgodD10CcQ
Last edited by Stewie Simpson; 07-23-2015 at 5:55 AM.
I think that you can use any stamp for a sawback. Apology for the confusion - I was thinking of planemaker stamps.
Planemaker stamps according to Chris Schwarz and Mazzaglia Tools:
http://mazzagliatools.com/BlumStamp.html
http://blog.lostartpress.com/2008/02...as-best-i-can/
Regards from Perth
Derek
Derek. Not all stamps. The Intaglio Lettering (shown below) is suitable for marking end grain on wood, not a hard metal surface.
You can get beautiful stamps,with ANY type font you desire,made by Buckeye Engraving Co.. That is where I got all my G,Wilson and other stamps made. You actually talk to the owner,who also helps make the stamps.
I prefer letters with serifs myself. Once you get a stamp made,you can order a matching one 10 years later,and they will make a perfectly matching one for you,regardless of the words you want the stamp to produce. We got several stamps made when we made those folding rules. They matched perfectly with the older,original name stamps we got made before.
They will make the stamps at sharp angles for cutting neatly into wood,or more blunt angles(still sharp),for stamping metal. My stamps have lasted many years,and the G.WILSON one most of the time is used to stamp tool steel(annealed,of course,but still harder on stamps).
I know one person(maybe in Australia) had a problem with Buckeye,but I have dealt with them several times with no problem.
Stewie,if you have a hydraulic press,you can use that stamp shown just above for pressing into brass saw backs. I'd certainly do it BEFORE folding them! Tyzack(or someone) used a much larger sunken mark on their saw backs.
I made my 50 ton press with a 50 ton Chinese jack. Built a very heavy steel "cage" to set it in. I am sure I posted pictures here of coining the Dolphin brooch/necklace here.It has been a very useful thing to have.
I have a 100 ton Enerpac jack and a hydraulic hand pump @ 10,000 # pressure,if I ever get round to building a super strong cage to operate it in. But,those things are HEAVY!!
Last edited by george wilson; 07-23-2015 at 6:51 AM.
Stewie, yes, that is the case, as it has been for 100s of years. But I choose not to use one like that on my tools and furniture since the force required is scary.
Read the thread I linked to earlier on for the opinion of others.
George, I continue to be very happy with the stamp from Buckeye (whom you pointed me to). I am now getting them to make me one that says "G. Wilson"
Regards from Perth
Derek
Looks good Stewie!
Hey, my ignorance of manufacturing is showing..... But do you stamp the brass back before or after folding it? If after, how do you keep from crimping it flat when using all that pressure? (Purely a curiousity question.)
Regards,
Fred
"All that is necessary for the triumph of evil is that good men do nothing."
“If you want to know what a man's like, take a good look at how he treats his inferiors, not his equals.”
Hi Fred. If I were using folded backs I would be stamping the metal prior to folding as recommended by George. I am using slotted backs with my backsaws. I plan to stamp the hard back after the slot has been filled by the saw plate.
regards Stewie;
Last edited by Stewie Simpson; 07-23-2015 at 7:29 AM.
Very nice Stewie.
If you haven't already, you may want to register/buy that domain name for when the time comes to launch your million dollar, world famous tool business!