This platter is too big for my photo booth so I took it on the lawn. It is the largest I can make on my lathe without going to the outboard set-up. 19 1/2" with a Carnuba wax polish over minwax polyurethane.
Cherry Platter 19.5%22.jpg
This platter is too big for my photo booth so I took it on the lawn. It is the largest I can make on my lathe without going to the outboard set-up. 19 1/2" with a Carnuba wax polish over minwax polyurethane.
Cherry Platter 19.5%22.jpg
Man that thing is huge. Beautiful!
Beautiful wood - for sure! Is the platter flat or is there a slight curve to it? How did you finish the bottom? Foot or no foot?
Steve
“You never know what you got til it's gone!”
Please don’t let that happen!
Become a financial Contributor today!
It is sort of dished with flat section in the middle with no real foot as such. I just put a gentle negative seep on the bottom to about 11/2 the diameter to make it a bit usable. Any suggestions other than a much bigger photo booth for taking pictures of this size object would be appreciated. Perhaps I should have put it on a small pedestal for the photo.
Doug