Shopsabre RC4 will be here soon. Wanted to get things ready and I have a few questions that will help me get started.
I have read most all the threads about this but i would like to have info specific to the router i will have.

I will have a 3 1/4 HP PC Router. Knowing that i will have to fine tune things as far as feed and speeds, and bits, etc,
Would any of you with the same or comparable router tell me the bits, materials, feeds and speeds you are using. This would be a big help in giving me a place to start.
Materials i will be cutting for sure are,
3/4" solid woods, hard and soft, (profile and pocket)
ply/mdf/particle board of different thickness,
Vcarving
whatever i find.
Appreciate any help.
Thanks
Chad