I'm rebuilding an older Craftsman Contractors table saw but the model # on case is unreadable. Need to get a couple parts for it but can't figure which model it is, pretty sure it's a 113 something, could sure use some help.
The table is 27”x20” on underside of table there are cast in numbers: 804211 E000 WE 442, below that are three cast in bumps about 1/8” dia, two are close together and one to the side as if placed in an arch, and a small pointer with a slotted head screw holding it or possibly cast in pointing to the two bumps that are next to each other.
On the main casting that shields the blade and controls bevel angle (forgot what that part is called) has: 4-5-78 then a square with a 1 right under it the square with the 1 in it partially covers: 834235 on the other side of a cast rib: XV 1
The arbor that has the shaft with drive pulley, blade runs on and adjusts the height of blade has: 802176 HA.
Don't know how to post pics or would to make it easier.
Cheers, Allen
Reply With Quote