Anyone know where to try in the US. I'm in Seattle so they must ship. Haven't called Hearne yet out of PA. I can get 16s here but only in 4/4. So anything from 16 up would work.
Thanks
Anyone know where to try in the US. I'm in Seattle so they must ship. Haven't called Hearne yet out of PA. I can get 16s here but only in 4/4. So anything from 16 up would work.
Thanks
try macbeath hardwoods. They seem to have a good assortment here in slc, but I know they have locations in Oakland and Sacramento I believe.http://www.macbeath.com
Last edited by Steve Wilde; 09-30-2015 at 11:24 AM. Reason: Added link
Try West Penn Hardwoods. Just saw some pictures of their warehouse on another forum, and it seems they carry a ton of stuff. Not sure if they have what you are looking for or not, but worth a shot.
West Penn is located right here in Hickory NC. Looking at their site they do ship so they may be worth a call. Good luck.
Red
RED
Check with Keim lumber in CHARM, Ohio,
They can get about anything.
Did you try Crosscut Hardwoods or Compton Lumber? Both on 1st Ave in Sodo, about a block apart.
googled this up here in OH-IO.
http://www.yoderlumber.com/lumber-mi...ilability.html
they show 6/4 cherry in 14'-16' lengths on their website.
No affiliation, no experience with them. I think though, that these guys are a source supplier to a lot of other places around here that sell hardwoods. You may get a little better price with them without the middle-men.
Brian
"Any intelligent fool can make things bigger or more complicated...it takes a touch of genius and a lot of courage to move in the opposite direction." - E.F. Schumacher
East Teak in Sultan might be able to get that for you. http://www.eastteak.com/us-woods/cherry/
~Garth
Yes Compton only 4/4. Also tried edensaw and hardwood industries. Tried Hearne hardwoods today to in PA.
When I want really,really nice cherry, I call Irion Lumber in Wellsboro,PA. They ship.