Need 16' cherry 6/4

[Craig D Peltier]

Anyone know where to try in the US. I'm in Seattle so they must ship. Haven't called Hearne yet out of PA. I can get 16s here but only in 4/4. So anything from 16 up would work.

Thanks

[Steve Wilde]

try macbeath hardwoods. They seem to have a good assortment here in slc, but I know they have locations in Oakland and Sacramento I believe.http://www.macbeath.com

[Michael Stein]

Try West Penn Hardwoods. Just saw some pictures of their warehouse on another forum, and it seems they carry a ton of stuff. Not sure if they have what you are looking for or not, but worth a shot.

[Randy Red Bemont]

West Penn is located right here in Hickory NC. Looking at their site they do ship so they may be worth a call. Good luck.

Red

[Max Neu]

Check with Keim lumber in CHARM, Ohio,
They can get about anything.

[Bill McNiel]

Did you try Crosscut Hardwoods or Compton Lumber? Both on 1st Ave in Sodo, about a block apart.

[Brian Tymchak]

googled this up here in OH-IO.

http://www.yoderlumber.com/lumber-mi...ilability.html

they show 6/4 cherry in 14'-16' lengths on their website.

No affiliation, no experience with them. I think though, that these guys are a source supplier to a lot of other places around here that sell hardwoods. You may get a little better price with them without the middle-men.

[Garth Almgren]

East Teak in Sultan might be able to get that for you. http://www.eastteak.com/us-woods/cherry/

[Craig D Peltier]

Yes Compton only 4/4. Also tried edensaw and hardwood industries. Tried Hearne hardwoods today to in PA.

[Craig D Peltier]

East Teak in Sultan might be able to get that for you. http://www.eastteak.com/us-woods/cherry/

Thanks I was right next door today too and didn't think of that.

[peter gagliardi]

When I want really,really nice cherry, I call Irion Lumber in Wellsboro,PA. They ship.