I had the bug this week to create a few salad bowls; C&C's are welcomed!!!
The first bowl is 15"x3" and started with a piece of BLM burl with a couple of holes that I patched with epoxy/coffee grounds, I formed a couple of rim layers of scrap walnut and spalted maple pieces to add some character and make the bowl a bit higher.
530.jpg529.jpg
The second bowl is 15'x6" natural edge Oregon white oak with a little pyro'd eagle feather and some carving for accent.
533.jpg535.jpg
The third bowl is a 16"x5.5" from a piece of BLM that had some soft spots that required some soaking in a 50/50 mixture of Elmer's/water and then rimmed with some nice claro walnut.
531.jpg532.jpg