An article in the Saturday 10/24/15 of the Seattle Times states Glowforge raised $25 Million in one month.
Does anyone know how this thing is vented sitting on a kitchen table. Cheap plastics are going to be problem in the kitchen.
[OP]
Member
An article in the Saturday 10/24/15 of the Seattle Times states Glowforge raised $25 Million in one month.
Does anyone know how this thing is vented sitting on a kitchen table. Cheap plastics are going to be problem in the kitchen.
Suquamish, WA
Epilog Legend 36EXT 75 Watt
CorelDraw 2.0 thru X7
Moderator
It's been discussed several times here.....
http://www.sawmillcreek.org/showthre...launched-today
http://www.sawmillcreek.org/showthre...-Laser-Printer
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Member
Thank you Steve for saving us all from rehashing it again
Originally Posted by Scott Shepherd
Trotec Speedy 400 120w, Trotec Speedy 300 80w
Thunderlaser Mars-130 with EFR 130w tube
Signature Rotary Engravers (2)
Epson F6070 Large Format Printer, Geo Knight Air Heat Presses (2)
Posting Permissions
Reply With Quote
