I recently purchased a LN 62 to use for both general smoothing and for handling trickier grain (with the 50 deg. blade). The workmanship is fantastic, and it is a beautiful piece of "industrial jewelry." One issue I have, though, is getting the blade square to the sole. Even though they are fiddly, I've been able to use the Stanley lateral adjuster lever and the LV Norris style adjuster with good results. I've done a search, and read about using finger pressure or tapping the side of the blade with a tiny hammer, but I'm looking for direct input from those of you here who have experience with planes that lack mechanical means of adjustment and have gotten good and relatively easy results. Thanks!