I wish bandsaw blade makers would laser etch their name on the band so you could tell who made it. I have a resaw blade that is a 3/4" band that is .024" thick with 4 TPI that works perfectly for resawing on my 14" Delta. Yes I know you supposedly can't properly tension a 3/4" blade on a 14" saw, but this blade works perfectly for me. I have resawed some 6" soft maple and was able to get two pieces 1/4" thick after planing. I rue the day when it gets dull and needs to be replaced as I don't recall where I got it. As I recall, there was a new bandsaw blade supplier that I checked out from a referral from either SMC or on a different site and found several bad typo's in their website. I reported these errors to the company and in return they offered to send me one of their blades. I ended up with the 3/4" band saw blade.