Many years I removed the popcorn painted drywall, did some electrical modifications and installed new drywall. Over the past few weeks I have been renovating again. Drywall was removed and more electrical changes. I don't know if I will have the need to do this a third or fourth time. But was thinking about putting up a wall covering that is not destroyed to remove it (as is drywall). I would like it to be flat like drywall. I have seen a system that is removable but uses a raised batten at the seams, which would not work for me. Does anyone have any ideas?
One thought I had was to use hidden fasteners for decking to hold up 16" wide pieces of plywood with a rabbeted edge. In the rabbeted edge(s) I would install a filler piece to cover the fasteners and fill in the rabbet(s). Thoughts?