The bevel lock handle is very difficult to move. Is there any way I can loosen the handle?
The bevel lock handle is very difficult to move. Is there any way I can loosen the handle?
When you assemble this lever did you put the 10mm washer in place?
I had this same problem with mine. In the book you will find the answer. Don't have it in front of me now but you need to loosen a nut on the back of the machine and it will free up.
Solved the problem. Thanks.
Behind the saw there is a round housing. Inside the housing are 2 bolts. Adjust the smaller bolt with 17mm socket. It was an easy fix.
image.jpg
Above are 2 pictures that show where the adjusting bolt is located.