Results 1 to 7 of 7

Thread: Bosch Glider Help Needed

  1. 01-09-2016, 2:28 PM #1
    Ed Gibbons's Avatar
    Ed Gibbons
    Ed Gibbons is offline [OP] Member
    Join Date
    Jul 2006
    Location
    Central, PA
    Posts
    416

    Bosch Glider Help Needed

    The bevel lock handle is very difficult to move. Is there any way I can loosen the handle?
    Reply With Quote Reply With Quote
  3. 01-09-2016, 2:53 PM #2
    ed vitanovec
    ed vitanovec is offline Member
    Join Date
    Dec 2004
    Location
    Richmond, TX
    Posts
    409
    When you assemble this lever did you put the 10mm washer in place?
    Reply With Quote Reply With Quote
  4. 01-09-2016, 3:06 PM #3
    Al Bacon
    Al Bacon is offline Contributor
    Join Date
    Mar 2010
    Location
    Western Vermont
    Posts
    80
    I had this same problem with mine. In the book you will find the answer. Don't have it in front of me now but you need to loosen a nut on the back of the machine and it will free up.
    Reply With Quote Reply With Quote
  5. 01-09-2016, 9:39 PM #4
    Ed Gibbons's Avatar
    Ed Gibbons
    Ed Gibbons is offline [OP] Member
    Join Date
    Jul 2006
    Location
    Central, PA
    Posts
    416
    Solved the problem. Thanks.
    Reply With Quote Reply With Quote
  6. 01-10-2016, 6:28 PM #5
    Rick Moyer
    Rick Moyer is offline Member
    Join Date
    Jan 2007
    Location
    central PA
    Posts
    1,774
    I don't have that tool, but it would be nice for others to know the solution, if you would care to share.

    Quote Originally Posted by Ed Gibbons View Post
    Solved the problem. Thanks.
    Reply With Quote Reply With Quote
  7. 01-12-2016, 3:42 PM #6
    Ed Gibbons's Avatar
    Ed Gibbons
    Ed Gibbons is offline [OP] Member
    Join Date
    Jul 2006
    Location
    Central, PA
    Posts
    416
    Behind the saw there is a round housing. Inside the housing are 2 bolts. Adjust the smaller bolt with 17mm socket. It was an easy fix.
    Reply With Quote Reply With Quote
  8. 01-12-2016, 3:49 PM #7
    Ed Gibbons's Avatar
    Ed Gibbons
    Ed Gibbons is offline [OP] Member
    Join Date
    Jul 2006
    Location
    Central, PA
    Posts
    416
    image.jpg

    Above are 2 pictures that show where the adjusting bolt is located.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules