So I have what seems like a stupid question. I'm trying to run a "Y" adapter from my dust collection to my cabinet saw and planer with blast gates on each line. Problem is, the "Y" adapter and blast gates are the same size as the dust ports on my dust collector and tools. I'm in a one car garage so I will be using flexible hose for these very short runs. Is there an "official" way to connect these parts? I'd really like to avoid super short pieces of hose going from the DC to the "Y" piece, then more short pieces hose from the "Y" to the blast gates but I haven't found anything on the Internets explaining this. What am I missing?