Hi Guys.
I am building a laser cutter and I am sitting on the fence of which DSP controller to buy. I welcome and would appreciate any thoughts about my shorlist in order.
1. rdc6442g
2. awc608 lite
Both controllers seem to boast similar features mostly.
I have read that the rdc6442 is more stable than the awc608 and you can adjust the speed and power of the current layer on the fly.
The awc608 have Z axis buttons on the front instead in a menu and a bigger display but puts the udisc usb on the panel where it could easily be broken.
I wish to work with the macro from Corel but not sure if the two different dsp's are as user friendly as each other.
Please help
Phill