Originally Posted by
Lane Hardy
Does anyone have any information on how the distance that QS18VP6D can be adjusted? I see 18 inches on the data sheet. Does that mean 0- to 18 inches adjustment? My dust barrel is only 19 inches tall I would like to at least be able to fill the barrel 1/2 full or more before the sensor is triggered.
Oneida lists theirs as being adjustable from 1"-20", so Id imagine it would work as close to at least 2". I have never measured mine to see how close it would work, but since its the same sensor they are using with no additional circuitry added it should perform within the same range.
If at first you don't succeed, redefine success!
Reply With Quote
