Here is a basic drawing of a 23' x 6' conference table I am working on. I posted in another area asking for suggestions regarding the interlocking edges.
FYI this table is designed in 5 sections, sitting on stringers supported by pedestals. The sections can be set up along the conference room walls when the room is used for entertaining purposes. The edge will be 3.5" tapered mahogany. Table to be constructed either out of 1.125" plywood with a laminate top, or MDF with a laminate top.
What do you guys suggest I go for regarding the top material and thickness? Thanks in advance
HP Conference Table 2.jpg