Hi there're a lot of threads like this but most of them are regarding using HF dust collectors which are not available in the UK.
Long story short:
We are going to lease a new unit and want to setup vent to outside and stop using Bofa units.
We have two machines, Fusion 32 and Zing 16 (at the moment).
Landlord let us make the vent hole(s) in the back wall where we plan to put the machines but they want us to supply the drawing and technical specs to attach them to the lease.
That's where the problem comes in.
We never used vent to outside and don't know what we might need. I've seen here some use inline blowers if mounted directly to the back of the machine. Some use dust extractors like green or red HF ones, also inside and outside.
What would you suggest or how would you set it up to get the best result with the least noise? I think we might be allowed to put a box with the extractor outside, but, again will need some drawing (and to be sure, that setup will work for us).
What inline blowers or dust collectors available in the UK would you recommend, also bearing in mind that we might have more machines in future and will need some flexibility.
Thank you!