I work with a guy who is just getting into turning. He bought a HF lathe, and one of the HF gouge sets. He asked a couple of days ago what a bowl gouge looked like, because he was failing miserably turning the inside of a bowl with anything than came with his kit. I brought him in one of my Hurricane bowl gouges to try, and he loved it (I only been turning for 18 months, and found Hurricane a great brand to learn to turn/sharpen with). He said he wasn't able to find them online, even from Hurricane's website. I looked on Amazon tonite (where I bought mine), and found the 3/8" gouge for $25 or so, but not available until November! I also found a 1/4" one for $737! Sorry for the rambling story, but I thought the entire thing rather odd.

http://www.amazon.com/Hurricane-Turn...ane+bowl+gouge