Grinder for CBN wheel for sharpening

[Mike Holbrook]

I used an old pre cut/scrap cabinet top to make the existing grinder platform from, as a temporary solution. The SB rest is maybe an inch from the edge. I plan to make another larger top. Still the design of the SB rest base may be a limiting factor. I am deciding whether or not to continue using the Delta grinder for my CBN wheels....A wider, “square” CBN wheel, like John K and Derek Cohen use, will not fit on the Delta’s arbor. My plan is to redesign the whole cabinet to fit the grinder and rests I will use, after I decide which grinder and CBN wheels to use, thus the questions I have posed.