Engraving etching aluminum / metal with some depth to it

[Don Nguyen]

I feel like I have hit a wall in my research, so hopefully you guys can help me out to give me additional ideas/topics to read up on.

What I am looking to do is be able to etch / engrave primarily aluminum and possibly steel to a depth of roughly .005" or a few thousandths more than that. What type of laser engraver heads and power/wattage levels should I be looking into to accomplish engraving on metal to that depth? From what I have researched, it seems like galvo is the way to go for me and power range maybe around 80 watts?

Also, kind of a side question. I have noticed some lasers simply have a red dot to mark the center point and other laser engravers outline an entire red box of the area being engraved, etc. What type of option is that?

Any help would be appreciated.

Thanks!

[Kev Williams]

You need a galvo steered fiber or a yag for engraving metal, not necessarily 80 watts though. I suppose you could engrave metal with a high-power (several hundred watt) C02 machine, but I think slag would be a problem (it's a problem with any laser).

As for red pointers, a galvo machine steers the beam with one moving mirror, therefore it can also steer the red pointer in the shape of a box (or any other shape it wants, but 4 sides is all ya get)

Nothing wrong with a single dot pointer, those are what you get with X-Y gantry machines. It might not be as 'automatic' as a whole red box but it works...

[Steve Morris]

probably fibre is best but whether galvo or gantry depends on the work area you want to cover.

[Don Nguyen]

Thanks for the info. With the info, I did some more researching and refined it down to that what may work well for my application is something around ~40-50 watt range through a galvo fiber laser.

Most of my experience on a laser machine is on an Epilog Zing machine, so that's my current only comparison/reference point.

I don't think I would mind trying to find a used US based galvo fiber laser machine, but I feel like I should keep the possible option of Chinese made machines as a possibility as well. Any suggestions on manufacturers to look into that make good galvo fiber machines?

[Gary Hair]

I feel like I should keep the possible option of Chinese made machines as a possibility as well. Any suggestions on manufacturers to look into that make good galvo fiber machines?

I have two G. Weike machines and although I'm happy with the machine, I won't give them a penny more of my business after the last purchase. I bought three machines, one for me and the other two for friends, and they were not configured how they should have been, all were missing the motorized Z axis. Lucy, the sales rep, was extremely difficult to work with in getting it resolved and handled it very poorly. Their mistake cost me extra customs/duties fees as well as additional shipping of the replacement parts to the other purchasers.
I will buy my next machine from BJJCZ, their support is phenomenal - they understand English as well as anyone I've ever emailed, not so with G. Weike. G. Weike seems to understand English much better before the sale than after...

[John Kleiber]

Out of the 15 plus emails I have sent BJJCZ, I have probably received at best 3 replies.
Of the 3 replies, all were 100% useless.
So with that said, if you know of someone at BJJCZ what can actually offer a solution and articulate it, feel free to message me.

[Gary Hair]

Out of the 15 plus emails I have sent BJJCZ, I have probably received at best 3 replies.
Of the 3 replies, all were 100% useless.
So with that said, if you know of someone at BJJCZ what can actually offer a solution and articulate it, feel free to message me.

I'm surprised by that based on my experience. I was emailing Shawn at technic@bjjcz.com His English is excellent!

[John Kleiber]

I'm surprised by that based on my experience. I was emailing Shawn at technic@bjjcz.com His English is excellent!

Yes, thats the one, technic@bjjcz.com, I emailed Shawn, he emailed me back some follow up questions. I not only answered his questions but also attached images and examples..... then, nothing.

I emailed him a follow up..... nothing but crickets, nada, nothing, dead air.

Did I figure out the issue myself? yes and with zero help from them.

-John

[Gary Hair]

Either I caught him on a good day or you caught him on a bad day... Or maybe "Shawn" is the name multiple people use at tech support and your "Shawn" wasn't as adept as mine?

[Nicolas Silva]

What I am looking to do is be able to etch / engrave primarily aluminum and possibly steel to a depth of roughly .005" or a few thousandths more than that. What type of laser engraver heads and power/wattage levels should I be looking into to accomplish engraving on metal to that depth?

Have you looked at a ULS laser with a HPDFO setup? It can directly mark metals. Not sure about the depth though.

Also, kind of a side question. I have noticed some lasers simply have a red dot to mark the center point and other laser engravers outline an entire red box of the area being engraved, etc. What type of option is that?

The red dot is positioning dot which lets you find the exact x-y position of were the beam would be. The box is a 'frame' option which lets you see how much room your job is going to use of your material. I find the frame option unnecessary since you can draw a box around your job and run just the box to get that info.

[Kev Williams]

I have nothing but good to say about Triumph- If I want to have some custom length lens tubes made, new mirrors, or know the weather forecast for Beijing this Saturday, all I have to do email Yolanda, and I'll get an email back! And while her typed English isn't the best, I haven't had trouble understanding what she's saying...

Their only flaw as I can tell is they're still a small company-- at this time I'm their only US buyer of a fiber laser. When I was diagnosing my stepper problem, their engineers (which are probably just a couple of young guys I'm sure) were very interested in what I found as they had another customer with the same problem. To be sure, they're building their machines with available off-the-shelf parts like most other laser mfr's in China, and while not perfect, I have no complaints on build quality.

I've never failed to have an email answered, and while I haven't needed much help, what I have needed -like the custom lens tubes I needed made and troubleshooting suggestions- help was quick and prices reasonable.

[Dave Sheldrake]

Have you looked at a ULS laser with a HPDFO setup? It can directly mark metals. Not sure about the depth though.

It's just a beam expander and short focal length lens system. It doesn't change the wavelength or photon energy so will only mark the surface of some metals like stainless.

[Don Nguyen]

Ok, so I wanted to do some more research on my own before posting another question. All of the information has been very helpful with my search.

After talking to some manufacturers. I have had one tell me that for a galvo fiber laser, if I am doing engraving on metal, that I do not need a fume extraction/filtration system. Is that correct? I wasn't able to search in particular for answers to that question.

I think based on my research, it may be between Argus and BJJCZ, just from the support that I have received from talking to the reps of each company so far. If anyone has additional information or input on either of those two companies, it'd be appreciated as well, since there's not much that I was able to find about them when searching google and the forums.

Thanks!

[Gary Hair]

I have extraction on my fiber as well as my co2. I don't know if the byproducts of lasering with the fiber are anything to be concerned about, but I am not willing to take a chance. If you saw the dust and detritus trail to the exhaust tube, you'd likely not question whether it's necessary or not.

As to the two companies - I've never heard of Argus so I can't comment on them. I bought a new controller for my first fiber from BJJCZ and from the first contact until I had it connected, configured, and fully functional, they were awesome! I've dealt with G. Weike quite a bit for both of my fibers and I will never work with them again! I will, however, buy my next machine from BJJCZ. Someone else here posted about a not-so-good experience with BJJCZ tech support, but that was not my experience.

[Don Nguyen]

I've noticed that the galvo fiber type machines, like the one you have from gweike, typically do not come with an enclosure. What or how did you end up setting up your machines for filtration, etc? Did you build your own enclosures or did you get one supplied from the manufacture?

Thanks

I have extraction on my fiber as well as my co2. I don't know if the byproducts of lasering with the fiber are anything to be concerned about, but I am not willing to take a chance. If you saw the dust and detritus trail to the exhaust tube, you'd likely not question whether it's necessary or not.

As to the two companies - I've never heard of Argus so I can't comment on them. I bought a new controller for my first fiber from BJJCZ and from the first contact until I had it connected, configured, and fully functional, they were awesome! I've dealt with G. Weike quite a bit for both of my fibers and I will never work with them again! I will, however, buy my next machine from BJJCZ. Someone else here posted about a not-so-good experience with BJJCZ tech support, but that was not my experience.