Hello All,
Maybe someone out there can help out. I have only had my Fusion 32 60W for a couple weeks now and I have to say I am very disappointed with the way it is vector cutting. Let me explain....
I recently posted on here that when I try to vector cut, the laser "pulsates" and does not seem to cut properly. People suggested checking to make sure that there were not a lot of nodes and one person suggested a node setting in Corel. Well I changed that setting in Corel and checked for nodes. There was not a lot of nodes but the machine continues to pulsate when it is cutting around curves or anything that is not a straight line.
Ive tried the following but it doesn't help:
1) I have tried setting freq from 1 all the way to 100
2) I checked and unchecked POWER COMP
3) I even tried different files
THE OTHER issue I am having is that this new machine (60W) wont even cut through 1/8" Baltic birch on the first pass!!! I set speed at 23 and power at 100 and it still wont cut all the way through! My 4 year old Mini 24 60W would cut through it on the first pass at 24 speed , 100 power so why wont this machine with a BRAND NEW tube cut through????
I have attached a few photos. I will try and figure out how to attach a short video of it pulsating while cutting once I get the video on this computer.
WayneIMG_7946.JPGIMG_7948.JPG