Greetings to all -

The next project in the queue is an Arts and Crafts Lamp Table inspired by the Stickley #576 (Image below). The top is comprised of five planks with breadboard ends held in place by pinned tenons. The mating lines of the five top planks feature a small chamfer on each edge, forming a V-groove at the glue line. I wonder if it makes more sense to add these features pre glue-up or post glue-up? I'm probably going to add splines to the glue joints to keep everything lined up, but anticipate some light smoothing after glue-up.

Comments and suggestions are most welcome. This will be my first attempt at a tabletop with this type of construction.