I have a customer that really wants an acrylic perpetual plaque. My only issue is the plates. Screwing into acrylic makes me cringe because it's so easy to crack acrylic. I did a test with some of my plaque screws and it seems to work okay but my fear is with 200 holes if one goes bad, I'm doing the whole job over. Tapping 200 holes is not what I'd consider an option. Potentially I could do it with a small electric drill but it's a step I'd like to avoid as it's a lot of extra work.
Anyone know of any screws that go into acrylic? Maybe some self tappers? These are little screws and have to hold next to no weight. Just need something that will have a low chance of causing the acrylic to crack.