Anyone know of one?? Only ones I can find are on alibaba and I'm really unfamiliar with that site. I know Rabbit sells tubes, but I don't know what brand they are for the 60 watt version.
[OP]
Member
US Distributor for EFR CL-1200??
Anyone know of one?? Only ones I can find are on alibaba and I'm really unfamiliar with that site. I know Rabbit sells tubes, but I don't know what brand they are for the 60 watt version.
4 - Q1 converted New Hermes C2000's
Signature 8080 Plus
Universal 50w X2-600
Universal 60w X-660
Epilog 60w Fusion 40
50w 5070 China Special
Contributor
Rabbit lists all the tubes they sell and their prices, if they don't have what you want call them they might be able to get it for you.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machineOh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
[OP]
Member
Yeah I saw that, but they only listed a manufacturer for 80W tubes so I didn't know what brand or model the 60W tubes are.
4 - Q1 converted New Hermes C2000's
Signature 8080 Plus
Universal 50w X2-600
Universal 60w X-660
Epilog 60w Fusion 40
50w 5070 China Special
Member
Lightobject out of Sacremento do the CL1200
You did what !
[OP]
Member
Do they? The only 60 watt tube I was able to find on their site earlier was an "SPT" brand.
4 - Q1 converted New Hermes C2000's
Signature 8080 Plus
Universal 50w X2-600
Universal 60w X-660
Epilog 60w Fusion 40
50w 5070 China Special
Member
I did buy mine from Alibaba, it is 60 watts tube and it does cut much better then my previous on. I had two tube they came with the laser. First on lasted on day, the other one gave up after 3 month. So I had to look for new one. ( I bought my laser on auction so no warranties on anything). I researched few from Alibaba. The guy from Alibaba said that the warranty will be one year. So I bought it. I have it for few days only but I it works great. I was cutting on old project and noticed the power so I was reducing my power for cutting form 99% to 28% and the pieces on wood were still falling down on the honeycomb. Very happy about it. The name of the company is: Shanghai Kraus&Noble Industrial Co.,Ltd. Not sure if I can post a link here but I'll try. This is where I bought it from:
https://shhkd.en.alibaba.com/product...836.186.jjFVp8
Posting Permissions
Reply With Quote