Has anyone ever done Dot Matrix engraving? If you do GOV'T Work it is Spec. AS478 -15A and Also if you guys have can I get a Picture of what it looks like.
Thank You in Advanced!!!
[OP]
Member
Has anyone ever done Dot Matrix engraving? If you do GOV'T Work it is Spec. AS478 -15A and Also if you guys have can I get a Picture of what it looks like.
Thank You in Advanced!!!
Eddie Castaneda
Wire-Tech, Inc.
Trotec Speedy 300 flexx 60W CO2 Laser/30W Fiber Laser
EngraveLab 9.0
CorelDraw X6
Contributor
a picture would be good
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machineOh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Contributor
Are you sure it was Dot Matrix and not Data Matrix Mil Spec 130 IDENTIFICATION MARKING OF
U.S. MILITARY PROPERTY
Mark
In the Great Northwest!
Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw
Contributor
Fiber lasers can do dot matrix, there's settings for it in EZcad. And probably better than a dot matrix machine, I've heard nothing but bad about those things as far as longeivity goes...
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now
ONE - vinyl cutter
CASmate, Corel, Gravostyle
[OP]
Member
Mark I'm Pretty Sure it was Dot Matrix Mode, Kev I'm going to have to find this setting for my trotec I have a few Customers that want it done.
Eddie Castaneda
Wire-Tech, Inc.
Trotec Speedy 300 flexx 60W CO2 Laser/30W Fiber Laser
EngraveLab 9.0
CorelDraw X6
Posting Permissions
Reply With Quote