[OP]
Member
I checked the search and found alot of crosscut sleds for the bandsaw. could not find any for miters. Has anybody made one for the bandsaw? I was thinking of making one mainly for cutting segments for some segmented turning. just seemed that would be safer than using the table saw for small pieces like that. The other concern I had is will the blade on the bandsaw flex too much making the cuts inaccurate?
Thanks
Grandpa always told me. "A good woodworker is not one that makes no mistakes. A good woodworker is one who knows how to cover up his mistakes."
Contributor
Table saw would be more accurate. My band saw is not accurate enough for segment pieces. Just my 2 cents.
Maker of Fine Kindling, and small metal chips on the floor.
Embellishments to the Stars - or wannabees.
Contributor
The segmenters I am familiar with use either a table saw or chop saw.
Posting Permissions
Reply With Quote