I'm finally able, using a 3/4" iturra blade, to cut thinner than 1/16" on my Grizzly G0555. The table is square to the blade and I'm pretty excited. The problem for me though is the stock fence is not very tall, and it's not really square with the blade. Any tips on how to square this fence or is there a decent modification to make to get a taller fence that's square? We had school off today for MLK, so I spent a good part of the day messing around with it. Tall strips of walnut look great but would be better if they were flat lol. If it makes any difference, it's off by about 5/32 with the top being further from the blade. Thanks