Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Whats going on with my laptop

  1. #1

    Whats going on with my laptop

    Went to work in corel draw this morning and it was doing weird things so I rebooted. Then it said updating windows don't turn off so after about 40 mins it shutdown. Then I booted and it took over an hour to configure windows then it said 100% complete and cleaning up that took 30 min's
    Now I'm waiting for it to start again.
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  2. #2
    Join Date
    Mar 2016
    Location
    Coppell, TX
    Posts
    908
    Which Operating System do you have and how old is the laptop?

  3. #3
    Sounds like a standard software update on a slow computer with a mechanical disk drive.

    Mike
    Go into the world and do well. But more importantly, go into the world and do good.

  4. #4
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,651
    Blog Entries
    1
    This is fairly common with Windows 10.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  5. #5
    Join Date
    Jun 2006
    Location
    The Hartland of Michigan
    Posts
    7,628
    Quote Originally Posted by Andy Giddings View Post
    Which Operating System do you have and how old is the laptop?
    Or what DID you have, and what do you have NOW.
    Never, under any circumstances, consume a laxative and sleeping pill, on the same night

  6. #6
    Win 7 pro ................

    Quote Originally Posted by Andy Giddings View Post
    Which Operating System do you have and how old is the laptop?
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  7. #7
    Its been pretty slow lately but I did a defrag and ran spybot

    Quote Originally Posted by Mike Henderson View Post
    Sounds like a standard software update on a slow computer with a mechanical disk drive.

    Mike
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  8. #8
    computer about 4 years old 64bit quad core
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  9. #9
    Join Date
    Sep 2006
    Location
    Henderson Kentucky
    Posts
    1,498
    Blog Entries
    2

  10. #10
    If you want to speed it up significantly, replace your mechanical drive with an SSD. You'll be amazed.

    I run Win 10 and a software update takes maybe a couple of minutes. That has been true on each of my computers (a dual core i3, a dual core i5 and a quad core i7). It seems that the "delay" is due to writing to the disk and not compute time.

    Mike
    Go into the world and do well. But more importantly, go into the world and do good.

  11. #11
    I've tried some of these free cleaners their free to download and scan your system but then when you want it to actually do the work and clean the system then they want 29.95 or what ever, and you have no idea if they work or not.

    Quote Originally Posted by Sean Troy View Post
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  12. #12
    I've been thinking about that but worried about the programs I have on it. This laptop runs my laser and I can't mess that up.LOL
    If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
    Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
    Lasercut 5.3
    CorelDraw X5

    10" Miter Saw with slide
    10" Table Saw
    8" bench mount 5 speed Drill Press
    Dremel, 3x21 Belt Sander


  13. #13
    Join Date
    Dec 2003
    Location
    Mountainburg, AR
    Posts
    3,031
    Blog Entries
    2
    Quote Originally Posted by Bert Kemp View Post
    I've tried some of these free cleaners their free to download and scan your system but then when you want it to actually do the work and clean the system then they want 29.95 or what ever, and you have no idea if they work or not.
    ccleaner is not that way at all. It is one of a handful of gotta have programs and utilities I keep and run on a regular basis.
    They do have a paid version but about the only thing it will do for you is automatic updates.
    Larry J Browning
    There are 10 kinds of people in this world; Those who understand binary and those who don't.

  14. #14
    Join Date
    Jun 2006
    Location
    The Hartland of Michigan
    Posts
    7,628
    Get ccleaner right from the maker.
    https://www.piriform.com/ccleaner
    I use it all the time. Do the registry clean and let it do it's thing.
    SSDs are nice, but not worth the cost. I have one for my boot drive. Doesn't speed things up all that much.
    Never, under any circumstances, consume a laxative and sleeping pill, on the same night

  15. #15
    Quote Originally Posted by Myk Rian View Post
    Get ccleaner right from the maker.
    https://www.piriform.com/ccleaner
    I use it all the time. Do the registry clean and let it do it's thing.
    SSDs are nice, but not worth the cost. I have one for my boot drive. Doesn't speed things up all that much.
    I have a 5 year old PC running Windows XP and switching from the old drive to a SSD improved my boot time from 7+ minutes to about 1.5 minutes.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •