Oneida Dust Cobra and plane shavings?

[Matthew Springer]

I'm looking at improving my shop tidyness factor with a better shop vac system. I'll be getting a full-on clearvue at some poitn from the big machines, so this is mostly for actual shop vaccuming. The fein turbo 3 is nice, but it keeps getting clogged on the masses of fluffy shavings from the planes. It also just doesn't seem to have enough oomph for the fine dust from the hand sanders

I'm looking at the Dust Cobra from Oneida but wanted to see if anyone had experience with a dust cobra and masses of fluffy shavings.

[Frank Pratt]

I've not used the Dust Cobra, but before I got a V-5000, I used a big Ridgid shop vac & a Dust Deputy & it handled the planer & jointer shavings very well. Pretty inexpensive solution to use until you are able to get the Clearvue.