Well I decided to build a steady rest for my lathe. I G.O. Ogled and found several designs. I liked the look of the one that Steve Schlumpf uses so I went with a version of that. I used some Oak that I had and the rind is 2 x 2 laminated. The base has a locking knob to secure to between the lathe ways. It sits pretty solidly in place when locked down. I ordered some rollerblade wheels. I didn't realize they light up when they turn, but it should make for some psychedelic turning..... I'm working on the arm build now. I think I'm going to make them able to swing so I can adjust the location of the arms. You can see my pencil marks where I'll create an angled dado. I'll create an arc'd groove for the locking knob so I can swing the arm up and down. I think it'll give me some good flexibility with the wheel location. Below are some pics so far. I also added a pic of my new DVR motor attached. I will finish it, paint it and show completed pics.

2.jpg1.jpg3.jpg4.jpg5.jpg6.jpg