This weekend I broke down and picked up a Dewalt planer (735X) after struggling for hours to smooth/square several 2x4s I'm using to build a bench and it seems to be doing and excellent job so far but I am going to have to still use my bench planes for a lot of the work on this project since I have no jointer.

I was hoping I could save a little time by running each half of my bench top through the planer to get a two flat faces. The top is comprised of 8 2x4s laminated with Titebond III. It's pretty heavy but I can still move it around the shop by myself. I'd guess it must weigh something like 80lbs.

Can I run this thing through my planer or will the rollers bog down? It measures ~11" wide and 3" thick. Obviously, I'll get a workout moving this around since I'll have to take off 1/32 at a time but I'm ok with that.