I have a hollow form with finial that I want to ship. Bubble wrap will adequately protect the vessel but I am somewhat concerned about the more delicate finial. I want to assure that the recipient does not reach in the box and damage the finial while removing the contents of the box while at the same time assuring that he/she realizes that there is more than just the vessel in the box so the finial is not disposed of inadvertently. I think a great solution would be a clear plastic tube similar to those used for cigars. Obviously the inside diameter (something that approximates 1.75") must be great enough to accept the finial and its length must be adequate. However, if I could find a much longer tube, as long as the ID is adequate, I could cut the tube into multiple lengths for future use. Each tube could then be capped off with something like duct tape when shipped. This would protect the finial while at the same time making its presence in the box obvious so it does not wind up in the trash with the box.
I have no idea who might sell something like this. Any ideas?