Question about duct work

[Bill Jobe]

I'm at a salvage store so hoping to get a quick response from someone, please.

They have 2 37.5" section of 503237 6" for $24.
Is that a good price?
I gotta get going on my DC.

[Bill Jobe]

And a "T" for $3

[Bill Jobe]

Heat fab safe-T- vent
Tubing is new. T is used.
Is 6" big enough?

[John K Jordan]

I have no idea what 503237 is, but normal 6" S&D (sewer and drain) pipe should be less than $15 for a 10' section. Is the pipe you are looking at thinwall? You don't need heavy wall since there is no pressure inside.

$3 for 6' fittings (ells?) sounds good - they should fit both the heavy and thin wall pipe. I used a lot more 45s and 22.5 ells than 90s on my system. I found the best price at the local ACE hardware but I don't remember how much.

JKJ

[Bill Jobe]

I have no idea what 503237 is, but normal 6" S&D (sewer and drain) pipe should be less than $15 for a 10' section. Is the pipe you are looking at thinwall? You don't need heavy wall since there is no pressure inside.

$3 for 6' fittings (ells?) sounds good - they should fit both the heavy and thin wall pipe. I used a lot more 45s and 22.5 ells than 90s on my system. I found the best price at the local ACE hardware but I don't remember how much.

JKJ

John, it's

[Bill Jobe]

No matter. Plan on a small Wood stove,anyway.