Hi brand new laser owner here. I bought a 50 watt Chinese laser and it arrived two weeks ago. I had never used one before. We are learning a lot from this forum and also youtube. (Thanks to all of you!) I have been making images on shot glasses successfully for the past couple of days. Today this started. I am making Cowboy shot glasses for a friend. Sent over file as normal 1 1/2 inch squared. When it was done it was squished (on left). My brilliant husband then made me a new graphic and compensated by making the second one 1 1/2 by 2 1/2. It worked perfectly. I have been trying to figure out what could have caused the issue in the first place but I'm at a loss. The other design is similar in size and this never occurred.
The rotary I have is the flat box with three silver poles on it. Any help would be very much appreciated. cs issues.jpg