[OP]
Member
Hi All .... Well I'm almost done getting the Laser where it should be .... here are a few pics of what I believe is a good spot to mount my Quick Disconnect for the Rotary and Y axis ..... looking for input if there is an issue that I can't see
I appreciate any and all comments
Brian
Last edited by Brian Book; 04-23-2017 at 3:02 PM.
Ray Fine 6040 80W RF Tube
Chuck Style Rotary
5000 CW Chiller
You mean Y,. And it should be ok, close to the current motor so that cable can be short.
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
[OP]
Member
Thanx John .... I made the correction
Brian
Ray Fine 6040 80W RF Tube
Chuck Style Rotary
5000 CW Chiller
Oh, your motor looks a bit more upright.... Running ok?
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others
[OP]
Member
Hi John .... Yes it is a little bit more upright but could be better .... But I think it's running ok for now .... I might talk to my Machinist Friend to see what he can come up with to make it right
Brian
Ray Fine 6040 80W RF Tube
Chuck Style Rotary
5000 CW Chiller
Posting Permissions
Reply With Quote